Salient Technical Features
Salient Technical Features of the equipment/system/services covered in IFB No 40064719 dated 28.10.2016 is mentioned below. These Salient Technical features are mentioned only to facilitate the prospective bidders to
1.0SCOPE OF WORK
The broad scope of work includes design, engineering, manufacture, testing at works, delivery and storage at site, erection, testing and commissioning of following:
a) All
2.0BRIEF DESCRIPTION OF
It is proposed to provide Screw chilling machines to meet the air conditioning requirement of all the air conditioned areas of Service building and Administrative building. Further,
2.1Air Conditioning System:
2.1.1.A/C Plant for Service building.
2.1.1.1The A/C system would comprise of:
(i)2 x 150 TR capacity screw compression type chilling machine.
(ii)Two (02) Nos. of primary chilled water pumps.
(iii)Two (02) Nos. of variable frequency driven (VFD) Secondary chilled water pumps
(iv)Two (02) Nos. of condenser cooling water pumps.
(v)Two (02) Nos. of variable frequency driven (VFD) cooling towers.
(vi)Five (5) nos. of variable frequency driven (VFD) air handling units (AHUs)
(vii)Interconnecting piping, duct work, insulation, cabling, PLC/Microprocessor based control panel, instrumentation, etc.
2.1.2A/C Plant for Administrative building. 2..1.2.1 The A/C system would comprise of:
(i)2 x 150 TR capacity screw compression type chilling machine.
(ii)Two (02) Nos. of primary chilled water pumps.
(iii)Two (02) Nos. of variable frequency driven (VFD) Secondary chilled water pumps
(iv)Two (02) Nos. of condenser cooling water pumps.
(v)Two (02) Nos. of variable frequency driven (VFD) cooling towers.
(vi)Ten (10) nos. of variable frequency driven (VFD) air handling units (AHUs)
(vii)Interconnecting piping, duct work, insulation, cabling, PLC/Microprocessor based control panel, instrumentation, etc.
2.1.3AC Plant for Auditorium.
2.1.3.1The AC system would comprise of
(i)2 x 30 TR capacity air cooled type condensing machine.
(ii)Two (02) Nos. of variable frequency driven (VFD) air handling units (AHUs) (iii)Interconnecting piping, duct work, insulation, cabling, PLC/Microprocessor/GIU
based control panel, instrumentation, etc.
2.1.4AC Plant for Canteen.
2.1.4.1The AC system would comprise of
(i)2 x 30 TR capacity air cooled type condensing machine.
(ii)Two (02) Nos. of air handling units (AHUs)
(iii)Interconnecting piping, duct work, insulation, cabling, PLC/Microprocessor/GIU based control panel, instrumentation, etc.
2.1.5
2.1.5.1AC plant control room in Administrative building, Service building and Auditorium building.
(i)6 x 3 TR Non Ductable (Split).
2.2Ventilation System :
Supply air fans/Exhaust air fans/Roof extractor fans with drive motors shall be provided for Central Workshops, service building, Administrative building, Canteen, Auditorium, toilet, pantry etc.