TECHNICAL SPECIFICATIONS
1.MATERIAL SPECIFICATION
Mild Steel plain round Bars for use as Reinforcement Steel, foundation bolts and earth mat
conductors shall conform to Grade E250 Quality A of IS 2062:2011
Additional Requirements |
: |
As listed below |
Size and Qty. |
: |
As per Bid Proposal Sheets (BPS) |
2.MECHANICAL TESTS
All mandatory tests shall be carried out as per the requirements of IS 2062 for all diameters.
3.STEEL MAKING PROCESS
Mild Steel plain round Bars shall be produced in a Steel Plant where iron making is followed by steel making then the molten steel shall be cast into semi-finished products which are finally rolled into finished products. Rolling process can be carried out located in Steel Plant or in factory / works of the bidder at a different location.
Alternately, the bidder may engage services of Conversion Agents (CA) / Wet Leasing Agents (WLA) for rolling the steel into finished products subject to meeting the following conditions:
a)NTPC will place purchase orders only on the bidder meeting the criteria specified at Clause 1.0 to 4.0 above and the steel products shall be lifted only from the bidder’s stockyard.
b)CA/WLA shall have a valid BIS license for the products under consideration at the time of submission of techno-commercial bid and Minimum of two years’ experience in producing steel products under consideration.
c)The bidder shall appoint a Third Party Inspection Agency (TPIA) for inspection of raw materials and finished products at CA/WLA works. An indicative list of TPIAs is listed below.
i.M/S RITES Ltd
ii.M/S Metallurgical & Engineering Consultants India Ltd.
iii.M/S Bureau Veritas (India) Pvt. Ltd
iv.M/S Lloyds
v.M/S SGS India Pvt. Ltd
vi.M/S Det Norske Veritas
d)TPIA shall ensure that all steel products are manufactured from the bidder supplied semis only. All the steel products shall be embossed with the bidder’s stamp as well as CA/WLA’s name/ code.
e)All consignments shall be accompanied by following documents:
i.Correlated material test certificates of CA/WLA, counter signed by TPIA and endorsed by the bidder.
ii.All the material test certificates issued by CA/WLA shall be duly signed and stamped both by the laboratory In charge of CA/WLA and TPIA. This shall be endorsed by
the bidder, with the remarks as "All the products under this test certificate are manufactured from the bidder’s raw material only."
iii.The bidder also shall certify that the testing equipment have been calibrated as per the NABL requirements.
iv.The Invoice & challan shall be issued by the bidder against each consignment with the mention of CA/WLA and also have a reference clearly linking with the bidder’s test Report and CA/WLA’s test certificate.
f)The bidder shall furnish an updated list of CA/WLA on half yearly basis or in case of new appointment / deletion of CA/WLA to NTPC.
4.MARKING
Identification and marking of plain bars shall be as per IS 2062.
5.INSPECTION AND CRETIFICATION
Manufacturers Test certificate (MTC) in English for each product with details as per IS 2062 shall accompany the product:
6.NTPC reserves the right to collect the samples from the supplied lot at site and send to third party for testing, if required, before releasing the payment.
|
|
|
|
|
|
|
|
|
Schedule 1 |
|
|
|
|
|
|
|
|
|
Page 1 of 1 |
|
|
|
|
|
|
SCHEDULE-I (MATERIALS LIST) |
|
|
Sl. |
|
Material |
Material Description |
Quantity |
Unit of |
No. |
|
|
|
|
|
|
|
|
Measurement |
|
|
|
|
|
|
|
|
|
1 |
|
M0165110808N |
|
Mild Steel plain round Bars conforming to Grade E250 Quality A of |
190 |
MT |
|
|
|
|
|
|
IS 2062:2011 , Diameter(mm) - |
16 |
|
|
|
|
|
|
|
|
|
|
2 |
|
M0165111005N |
Mild Steel plain round Bars conforming to Grade E250 Quality A of |
150 |
MT |
|
|
|
|
|
|
IS 2062:2011 , Diameter(mm) - |
20 |
|
|
|
|
|
|
|
|
|
|
|
3 |
|
M0165111254N |
|
Mild Steel plain round Bars conforming to Grade E250 Quality A of |
50 |
MT |
|
|
|
|
|
|
IS 2062:2011 , Diameter(mm) - |
25 |
|
|
|
|
|
|
|
|
|
|
4 |
|
|
M0165111607 |
Mild Steel plain round Bars conforming to Grade E250 Quality A of |
140 |
MT |
|
|
|
|
|
|
IS 2062:2011 , Diameter(mm) - |
32 |
|
|
|
|
|
|
|
|
|
|
5 |
|
|
M0165112008 |
|
Mild Steel plain round Bars conforming to Grade E250 Quality A of |
610 |
MT |
|
|
|
|
|
|
IS 2062:2011 , Diameter(mm) - |
40 |
|
|
|
|
|
|
|
|
6 |
|
M0165112503 |
Mild Steel plain round Bars conforming to Grade E250 Quality A of |
70 |
MT |
|
|
|
|
|
|
IS 2062:2011 , Diameter(mm) - |
50 |
|
|
|
|
|
|
|
|
7 |
|
M0165114004 |
Mild Steel plain round Bars conforming to Grade E250 Quality A of |
90 |
MT |
|
|
|
|
|
|
IS 2062:2011 , Diameter(mm) - |
80 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
TOTAL OF 1 TO 7 ABOVE |
1300 |
|
|
|
|
|
|
|
|
|
|
|
•This Schedule does not give a full description of the material to be supplied under each item and the “Technical Specifications” contains the full description of the material to be supplied under each item.
Schedule-II
Page 1 of 2
|
|
SCHEDULE-II (PLANTS/STATIONS LIST) |
|
Sl. |
PROJECTS |
|
No. |
|
|
|
|
|
|
1. |
Tanda(2x660MW) |
|
2. |
Darlipalli(2x800MW) |
|
3. |
Gadarwara (2x800MW) |
|
4. |
Lara (2x800MW) |
|
5. |
Kudgi (3x800MW) |
|
6. |
New Nabinagar (3x660MW) |
|
7. |
Mauda (2x660MW) |
|
8. |
Meja (2x660MW) |
|
9. |
Solapur (2x800MW) |
|
10. |
BRBCL (4x250MW) |
|
11. |
Muzaffarpur (2x195MW) |
|
12. |
Bongaigaon (3x250 MW) |
|
13. |
Patratu (3x800 MW) |
|
14. |
Telangana (2x800 MW) |
|
15. |
Khargone (2x660 MW) |
|
16. |
North Karanpura (3x660 MW) |
|
|
Sub Total |
|
|
STATIONS |
|
|
|
|
17. |
Vindhyachal |
|
18. |
Singrauli |
|
19. |
Korba |
|
20. |
Ramagundam |
|
21. |
Farakka |
|
22. |
Rihand |
|
23. |
Kahalgaon |
|
24. |
Dadri |
|
25. |
Talcher-Kaniha |
|
26. |
Unchahar |
|
27. |
Talcher -Thermal |
|
|
Simhadri |
|
|
Badarpur |
|
|
Sipat |
|
|
Anta |
|
|
Auraiya |
|
|
Kawas |
RATE CONTRACT FOR SUPPLY OF STEEL TMT BARS FOR NTPC PROJECTS, IT'S SUBSIDIARIES & JVS-16-17
Schedule-II
Page 2 of 2
|
SCHEDULE-II (PLANTS/STATIONS LIST) |
|
|
|
STATIONS |
|
|
34. |
Gandhar |
|
Kayamkulam |
|
Faridabad |
|
Jhajjar |
|
Vallur |
|
Ratnagiri |
|
Barh |
41. |
NSPCL Bhilai |
42. |
NSPCL Rourkela |
43. |
NSPCL Durgapur |
|
Sub Total |
|
Total |
RATE CONTRACT FOR SUPPLY OF STEEL TMT BARS FOR NTPC PROJECTS, IT'S SUBSIDIARIES & JVS-16-17
