ANNEXURE-A

SALIENT TECHNICAL FEATURES

PLANT OVERVIEW

NTPC Talcher kaniha (TSTPS) plant is located in Kaniha Block under Talcher sub-division of Angul district, in the state of Orissa.

Nearest Town: Talcher 26Kms.

Nearest Railway Station: Talcher 29 Kms.

Nearest Airport: Bhubaneswar 180 Kms.

INSTALLED CAPACITY

STAGE-I - 2 UNITS EACH 500MW- TOTAL -1000MW

STAGE-II- 4 UNITS EACH 500 MW – TOTAL -2000 MW

EQUIPMENTS INVOLVED IN THE CONTRACT:-

All the air preheaters in Two units of Stgae-II , BHEL boiler are to be overhauled. Each Unit consists of two Primary and Two secondary air preheaters each.

PRIMARY AIR PREHEATER: TYPE: 26.5VIM 2000, MAKE : M/S BHEL Ranipet 2 NO.S PER BOILER

LJUNGSTROM AIR PREHEATER is a device designed to transfer the heat flow from gas to air through air preheater. It consists of a moving part which is composed of a cylindrical Rotor with vertical modules are attached. 3 layers of Baskets containing the heating elements are placed in each module.

HEATING ELEMENTS: NO OF SECTORS : 12, EACH SECTOR 8 BASKETS :HOT END 8 BASKETS INTERMEDIATE END, 10 NOS. IN COLD END. TOTAL NO OF BASKETS: 312.

Rotor is driven by electric motor with gear box, Standby electric motor and air motors are provided.

SECONDARY AIR PREHEATER: TYPE: 30 VIM 2000, MAKE : BHEL RANIPET,

2 NO.S BOILER

LJUNGSTROM AIR PREHEATER is a device designed to transfer the heat flow from gas to air through air preheater.

HEATING ELEMENTS: NO OF SECTORS : 24, EACH SECTOR 7 BASKETS : HOT END 7 BASKETS INTERMEDIATE END, 8 NOS. IN COLD END. TOTAL NO OF BASKETS: 528.

Rotor is driven by electric motor with gear box, Standby electric motor and air motors are provided.

JOBS IN BRIEF:

In general the contract consists of Removal and repair of all Hot, Intermediate and Cold end baskets. Putting back the baskets after HP jet cleaning. HP jet cleaning to be done by other agency as employed by NTPC.

Creating complete access to top and bottom of APH by erecting the scaffolding and thorough inspection of all areas. Servicing/replacement of Guide/Support bearings, Servicing of main Gear box, Soot blower gear box, Lub oil system. Repairing of center section and APH connecting ducts.

Repair of Sector plates, guide bearing sealing system, replacement of radial, axial, circumferential seals, seal setting etc.