Salient Technical Features of the equipment/systems/services covered in IFB no. 40024591 are mentioned below. These Salient Technical Features are mentioned only to facilitate the prospective bidders to
Salient Technical Features
A.
1.0SCOPE OF WORK
The broad scope of work includes design, engineering, manufacture, testing at works, delivery and storage at site, erection, testing and commissioning of all
2.0BRIEF DESCRIPTION OF
It is proposed to provide screw chiller based centralized
2.1AC Plant for Main plant:
2.1.1One Centralized chilled water type
a)Control Rooms (CRs), Control Equipment Rooms(CERs),
b)UPS, Battery charger Rooms.
c)SWAS Room.
2.1.2The AC system would comprise of
(i)3 x 185 TR capacity screw compressor type chilling machine.
(ii)Three (03) Nos. of chilled water pumps.
(iii)One (01) No. of condenser water pump.
(iv)One (01) No. of cooling tower.
(v)Eight (08) nos. of variable frequency driven (VFD) air handling units (AHUs)
(vi)Interconnecting piping, duct work, insulation, cabling, DCS based control panel, instrumentation, etc.
2.2AC Plant for ESP Control Rooms:
2.2.1The AC system would comprise of
(i)4 x 45 TR capacity air cooled type condensing units.
(ii)Four (04) Nos. of variable frequency driven (VFD) air handling units (AHUs)
(iii)Interconnecting refrigerant piping, valves, duct work , insulation, cabling, DCS based
control panel, instrumentation, etc.
2.3AC Plant for Water system control building:
2.3.1The AC system would comprise of
(i)2 x 25 TR capacity Air cooled type condensing units.
(ii)Two (02) Nos. of variable frequency driven (VFD) air handling units (AHUs)
(iii)Interconnecting piping, duct work , insulation, cabling, DCS based control panel, instrumentation, etc.
B.
1.0SCOPE OF WORK
The broad scope of work includes design, engineering, manufacture, testing at works, delivery and storage at site, erection, testing and commissioning of all
2.0BRIEF DESCRIPTION OF
It is proposed to provide screw chiller based centralized
2.1AC Plant for Main plant:
2.1.1One Centralized chilled water type
a)Control Rooms (CRs), Control Equipment Rooms(CERs),
b)UPS, Battery charger,
c)SWAS Room.
2.1.2The AC system would comprise of
(i) 3 x 185 TR capacity screw compression type chilling machine. (ii) Three (03) Nos. of chilled water pumps.
(iii) One (01) No. of condenser water pump. (iv) One (01) No. of cooling tower.
(v) Eight (08) nos. of variable frequency driven (VFD) air handling units (AHUs)
(vi) Interconnecting piping, duct work, insulation, cabling, DCS based control panel,
instrumentation, etc.
2.2AC Plant for ESP Control Rooms:
2.2.1The AC system would comprise of
(i)4 x 45 TR capacity air cooled type condensing units.
(ii)Four (04) nos. of variable frequency driven (VFD) air handling units (AHUs)
(iii)Interconnecting refrigerant piping, valves, duct work , insulation, cabling, DCS based control panel, instrumentation, etc.